How to Clean Acrylic

Cleaning Acrylic Windows

Blow dirt or dust off the window. Because acrylic is easily scratched, you don’t want to just wipe away any dirt or dust that is on the surface of the window. Instead, use air or water to remove dirt before you begin to clean. You can use canned air to blow dirt off of the windows, or drip water onto the surface that picks up the dirt and allows you to float it off. If you use water, blot the window dry with a microfiber cloth after the dirt has come up.

Use clear water to clean lightly soiled acrylic. If your acrylic window still needs a bit of cleaning after you've removed the top layer of dust and dirt, use clear water to clean it. Simply repeat the process of dropping water onto the surface of the acrylic and blot it dry with a microfiber cloth. Don’t rub the window with the microfiber cloth as this can cause scratches in the acrylic.

Use a non-abrasive cleaner on dirtier windows. If you’re washing particularly dirty or outside-facing windows, mix equal parts non-abrasive cleaner and water to make a cleaning solution. Then dip a microfiber cloth in the solution and gently blot the acrylic surface clean. Good non-abrasive cleaners for this type of cleaning are castile soap, baby shampoo, or Woolite or Dreft.

Blot the surface dry. Once you’re done cleaning the acrylic window, use a dry microfiber cloth to blot the surface of the window dry. Avoid wiping the cloth across the surface of the window as this can cause scratches.

Remove scratches using car wax. If, once you’ve cleaned the window, you discover scratches in the surface, you can use car wax to remove them. Apply wax to the areas that are scratched and use the buffer that comes with the wax to buff the surface. If you’ve never buffed a surface before, proceed for gently with this step.

Scrape the surface. If you have very deep scratches in the acrylic, you scrape the surface of the acrylic. Hold a sharp scarping tool at a 10 degree angle and move it from side to side, evenly and gently scraping off the excess. This technique should only be used for very, very deep scratches.

Sand the surface. Sanding the surface of acrylic gives it a matte finish, which gives it a frosted look. You can perform this technique with sand paper by hand, or with sanding tools. Simply sand the acrylic surface the same way you would with a piece of wood – start with a coarser sand paper and once you’ve worked over the entire surface, move to a finer paper and repeat the process. Using a buffer after you sand acrylic can give your acrylic an extra shiny finish. This technique should only be used on unfinished acrylic or if your acrylic windows have suffered extreme damage from storms.

Cleaning Acrylic Furniture

Avoid using dusting cloths. The biggest concern with acrylic furniture is the risk of scratching. When you’re prepping the surface of your acrylic furniture, avoid using a dusting cloth to remove dirt and dust. These types of cloths can trap particles that won’t seem big to the naked eye, but will scratch your furniture. Use a clean microfiber cloth instead.

Use cleaners specifically designed for plastics. Even though acrylic furniture is clear, you shouldn’t use the same cleaners that you do on glass windows to clean it. Cleaners specifically made for plastics, like Brillianize cleaner, is the best option for cleaning your acrylic furniture. It prevents scratches and won’t leave a film on the surface or break down the acrylic, giving it a cloudy appearance.

Clean small areas at a time. Squirt a small amount of cleaner onto the piece of furniture you’re cleaning and then polish that area with your cloth. Once you’re done with that small area, move on to the next. Don’t spray the whole piece of furniture and then wipe it down.

Cleaning Acrylic Tubs

Don’t use aerosol cleaners on acrylic bath tubs. When cleaning an acrylic bath tub, avoid using any aerosol or acetone cleaners. The chemicals in those cleaners can eat through the acrylic of your tub.

Use mild dish soap on acrylic tubs. To clean acrylic bathtubs, use a mild dish soap with warm water. Wet the sides of the tub and a soft sponge with warm water. Apply a small amount of a mild dish soap to the sponge and gently scrub the tub. You should avoid using wire brushes or scrubbing pads as these can scratch the acrylic and ruin it.

Use lemons to remove hard water stains. Instead of using cleanser on hard water stains on your bathtub, try rubbing lemons over the stains. Let the lemon juice sit on the stain for a few minutes, and then rinse with water and before drying it with a microfiber cloth.