Passenger Jumps Out Of Plane Taxiing At Phoenix Airport
Passenger Jumps Out Of Plane Taxiing At Phoenix Airport
A passenger on an arriving Southwest Airlines flight taxiing at Phoenix's main airport opened a galley door, jumped out and ran to an airport fire station where he barricaded himself, authorities said Saturday.

PHOENIX: A passenger on an arriving Southwest Airlines flight taxiing at Phoenix’s main airport opened a galley door, jumped out and ran to an airport fire station where he barricaded himself, authorities said Saturday.

The man’s identity wasn’t immediately released, and it wasn’t immediately clear why he jumped from Flight 4236 after it’s arrival at Sky Harbor International Airport from Colorado Springs, Colorado, at about 8 a.m. Saturday.

After the man exited the aircraft,” the aircraft’s captain notified the control tower so local authorities could respond to the situation, Southwest spokesperson Dan Landson said in an email. The plane with its crew and remaining passengers then went to its designated gate, Landson said.

Meanwhile, the 30-year-old man entered the fire station, walked into a dorm room and locked himself inside, Fire Capt. Todd Keller, a Phoenix Fire Department spokesperson, said in an email.

After few minutes, firefighters were able to get the man to unlock the door, and he was then evaluated, treated for a lower leg injury and transported to a hospital, Keller said.

The Phoenix Police Department said in an email it was investigating the incident and provided no additional information on the incident, including the man’s status.

The incident did not delay airport operations, Sky Harbor spokesperson Julie Rodriguez said.

A Federal Aviation Administration spokesperson referred an inquiry to local authorities.

Disclaimer: This post has been auto-published from an agency feed without any modifications to the text and has not been reviewed by an editor

Read all the Latest News here

What's your reaction?

Comments

https://ugara.net/assets/images/user-avatar-s.jpg

0 comment

Write the first comment for this!