Creating a Design with Shrinky Dinks
Draw, trace or copy an image onto a Shrinky Dinks plastic sheet. Shrinky Dinks are usually sold as 8-inch by 10-inch plastic sheets. Use colored pencils, markers, and ink on Shrinky Dinks. Use the colored pencil on the rough side of the sheets, and use Sharpie or permanent marker on the smooth side. Some Shrinky Dinks come pre-cut and with designs already outlined on them, and others will just be the plastic sheets. Don’t use oily or waxy substances like crayons or oil paint on Shrinky Dinks because they will melt in high heat. Some sheets are machine-sanded frosted sheets that usually come in packs of 10. Some Shrinky Dinks come as non-sanded sheets, though; that version requires permanent markers. Printing from a computer directly onto a sheet is also possible, and works great with photos. Print letters in a mirror image so they can be read from the nicer shiny side once shrunk. Tracing is popular as well.
Cut a design or punch holes in the plastic. You may want to add decorative edges to the plastic, cut out your design, or punch holes in it to make it into a necklace or charms for a bracelet. Use paper punches if you want holes in the plastic. You might want holes if you are making jewelry or just for decoration. Punch any holes before you bake the Shrinky Dinks. Cut out your design with decorative or regular scissors.
Baking the Shrinky Dinks
Line a cookie sheet tray with non-stick aluminum foil or baking paper. You could also create a mock tray by folding aluminum foil. Place the Shrinky Dink cut-out designs on the tray, rough side up. Leave space between the Shrinky Dink plastic shapes or they might stick together. Ovens should only be used with adult supervision.
Preheat the oven at 325 degrees Fahrenheit. You probably only need to pre-heat the oven for 1 to 3 minutes. You can use a toaster oven or a conventional oven. Once the oven is preheated, put the tray with the Shrinky Dinks into the oven. You only need to bake them for 1 to 3 minutes. At first the Shrinky Dinks will curl up, but they will flatten back out. Once they flatten back out, bake for 30 more seconds.
Remove the tray from oven. Use a potholder so you don’t burn yourself, and be careful. You could flatten your Shrinky Dinks more by pressing them flat with folded paper. However, this step may not be necessary. Let the Shrinky Dinks cool for a few minutes before handling them. The finished piece will shrink to 1/3 the original’s size, but it will become 9 times thicker. The artwork will be brighter and bolder, and you can more easily preserve it.
Making Homemade Plastic Designs
Obtain a piece of #6 plastic. For example, this is the kind of plastic often used in salad bar containers. Look for a “6” on the bottom of the plastic. The plastic needs to be relatively thick to work. Cut away the extra plastic until you are left with a flat square.
Draw your design on the plastic, using permanent marker. It’s best with this kind of plastic not to use colored pencils. Once baked, the image will shrink to about a third of its size and will increase in thickness. Cut your design out and/or punch holes in it. Round the corners a bit as edges may sharpen upon baking.
Preheat your oven to 350 degrees. Put the rack in the lowest oven position. The reason the plastic works for designs is because it’s made out of polystyrene just as Shrinky Dinks are. Make a tray out of aluminum foil by folding it until it’s thick enough to hold the plastic. Put the plastic designs on the tray. Bake for about 3.5 minutes. The plastic will curl, and then straighten itself out. Remove, and allow to cool.
Finished.
Comments
0 comment